Pull-Out Kitchen Faucet With Retractable Nozzle

A pull-out kitchen faucet with retractable nozzle has a spray head connected to a flexible hose. The head pulls out from the spout and returns automatically when released. The faucet body rotates 360°.
Installation
Single-hole installation. Pre-connected hoses are included. Average installation time runs 15–20 minutes. A three-hole deck plate is available for sinks with existing three-hole configurations.

Nozzle and Hose
The nozzle pulls out 400–600mm. Two spray modes are available: aerated stream and wide spray. Some models include a pause button that stops water flow without turning off the main valve. The hose retracts by gravity weight or magnetic docking depending on model. Magnetic docking holds the nozzle flush against the spout after retraction.
Spout Rotation
The spout rotates 360°. On double-sink setups, the spout swings fully to either basin without repositioning the body.
Retraction System
Gravity retraction uses a weighted counterbalance on the hose. Magnetic docking pulls the nozzle into a fixed position at the spout base. Both types are available depending on specification.
Water Flow
Flow rate is controlled at 1.5–1.8 GPM (5.7–6.8 L/min). Meets North American CEC Title 20 and WaterSense requirements.
Typical Applications
The pull-out kitchen faucet with retractable nozzle is installed in residential kitchens, apartments, villas, rental properties, hotel preparation rooms, restaurant kitchens, and canteen washing areas. Also used in real estate pre-furnished projects, student dormitories, and renovation fit-outs.
Materials
Ceramic valve core rated for 500,000+ open/close cycles. 304 stainless steel braided hose, EPDM sealing rings, double-layer sealing structure at the nozzle connection. Silicone spray nozzle openings — residue wipes off by hand. PVD vacuum coating available on surface finish, passing 48-hour CASS salt spray testing.
Surface Finishes
Chrome, brushed nickel, matte black, brushed gold, and gunmetal gray available. PVD custom colors supported on OEM orders.
Certifications
NSF/ANSI 61 & 372 (lead content ≤0.25%), cUPC, CE, WaterSense. Full certification documentation provided with shipment. Certificates support official verification.
OEM/ODM available on finish, nozzle configuration, hose length, and branding.

FAQ
Q1: Will the retractable nozzle leak?

The pull-out kitchen faucet with retractable nozzle uses a ceramic valve core, EPDM sealing rings, and a double-layer sealing structure at the nozzle joint. Leakage under normal use conditions is uncommon. Common causes when it does occur: aged sealing ring, installation error, or water pressure outside the rated range.
Q2: How durable is the hose?

304 stainless steel braided hose with PEX inner tube. Tested to 500,000 pull-and-retract cycles. For hotel, apartment, and commercial kitchen projects, reinforced braided hose is recommended.
Q3: What if the nozzle stops retracting?

Gravity retraction models depend on the counterweight remaining free. Magnetic docking models hold position at the spout base and do not rely on hose tension. Magnetic versions are less likely to develop retraction issues over extended use.
Q4: Is the spray nozzle easy to clean?

The nozzle openings are silicone. Mineral deposits and residue can be cleared by rubbing with a finger under running water.